WARNING • Thermostat: E5 / Init

Coleman-Mach, Dometic & Furrion A/C: Dometic CCC2 / Furrion E5 — Communication Error

Wall thermostat lost data bus communication with the rooftop A/C control box.

← Live Decoder
Field Safety Warning: Kill both 120V A/C and 12V DC circuits before servicing the ceiling control box.

Checkable Field Troubleshooting Steps

Most Probable Root Causes

  • Loose RJ-11 phone-style data cable in ceiling plenum
  • Corroded crimp connector on zone control board
  • DIP switch mismatch after board replacement
Deep-Dive Technical Guide
30A vs 50A Power Guide

Why 50-amp RV pedestals deliver 3.3x more power than 30-amp pedestals (not 1.6x), how to avoid melting dogbone adapters, safe low-voltage cutoffs, and how A/C soft starters work.

Read Complete Field Guide →

OEM Replacement Parts & Cross-References

Micro-Air OEM: ASY-368-X48-BLUE
Micro-Air EasyStart 368 Soft Starter (Bluetooth)
Cross-Ref: EasyStart Flex

Cuts rooftop A/C startup LRA surge by 65–75% to run on 30A shore or 2200W inverter gen.

Disclosure: As an Amazon Associate and eBay Partner, CodeMyRV earns from qualifying purchases at no additional cost to you. See our Affiliate Disclosure.

Frequently Asked Questions About Rooftop A/C E5

What does Rooftop A/C fault E5 mean?

Wall thermostat lost data bus communication with the rooftop A/C control box.

What are the most common causes of Rooftop A/C E5?

Loose RJ-11 phone-style data cable in ceiling plenum; Corroded crimp connector on zone control board; DIP switch mismatch after board replacement.

What safety precautions apply before troubleshooting E5?

Kill both 120V A/C and 12V DC circuits before servicing the ceiling control box. Always disconnect 120V shore power and shut off LP gas supply valves before probing live electrical or gas components.

Other Coleman-Mach, Dometic & Furrion A/C Fault Codes