WARNING • 4 Blinks, pause, 5 Blinks

Cummins Onan QG Generators: Code 45 — Speed Sense Fault

Controller failed to detect engine rotation pulses from the quadrature winding or magneto.

← Live Decoder
AMBER (4-5)
2nd-Level Code Retrieval: While the amber switch blinks 3x (Service Fault), press STOP once to read the 2-digit code (4 blinks, pause, 5 blinks).
Field Safety Warning: Disconnect 12V battery power before reseating the generator control board harness.

Checkable Field Troubleshooting Steps

Most Probable Root Causes

  • Stuck starter solenoid or seized engine
  • Loose connector at the main control board (J1)
  • Failed ignition coil or control board
Deep-Dive Technical Guide
Onan Code 36 Playbook

Step-by-step campground troubleshooting for Onan QG generators that crank without starting or die after 3 seconds—covering 2nd-level blink retrieval, fuel cutoff, slip rings, and carb jets.

Read Complete Field Guide →

OEM Replacement Parts & Cross-References

Cummins Onan OEM: 167-0275
Onan QG 4000 / 5500 Spark Plug (Gap 0.025 in)
Cross-Ref: Champion RS17YX

Fouled plugs frequently trigger Code 36 or Code 45 cranking faults.

Disclosure: As an Amazon Associate and eBay Partner, CodeMyRV earns from qualifying purchases at no additional cost to you. See our Affiliate Disclosure.

Frequently Asked Questions About Onan Generator 45

What does Onan Generator fault 45 mean?

Controller failed to detect engine rotation pulses from the quadrature winding or magneto.

What are the most common causes of Onan Generator 45?

Stuck starter solenoid or seized engine; Loose connector at the main control board (J1); Failed ignition coil or control board.

What safety precautions apply before troubleshooting 45?

Disconnect 12V battery power before reseating the generator control board harness. Always disconnect 120V shore power and shut off LP gas supply valves before probing live electrical or gas components.

Other Cummins Onan QG Generators Fault Codes